AWNING

▪ BX 260 FOLDING ARM
The folding arm awning BX260 is a modern cassette-folding arm awning with a design that strive for elegance. The BX260 is a real trendsetter as regards the look. The extremely low depth of the cassette ensures that this awning integrates perfectly with the façade of your house. Its special construction with both wide wall brackets allows the awning to be mounted on practically any background.


General Specifications  
The arms | Extruded powder coated aluminium arms.
The hinges | High pressure cast aluminium alloy. Hinge on durable slide bearings of toughened bronze
                         with a PTFE sliding layer. The most heavily loaded parts are thermally treated.
Springs and steel cables | Zinc plated high quality spring steel.
                                                  Grease impregnated Zinc plated steel cables ensure an even division of power.
The shoulder | Extruded powder coated aluminium components. Angle range from 10° to 45°
Width sizes | Minimum 2.5 meters in one part with two arms. Maximum 6 meters in one part with two arms. Projection sizes | 5 standard sizes of 1.5m, 2m, 2.5m, 3m & 3.5m
Operation | Manual operation using a crank and gearbox is also available.

Safety Test  
All folding arm products undergo extensive quality tests.
In this way for example, the folding arms of the awning are tested to carry out 20.000 movements.

The BX260 complies with the requirements set by the European standard EN13561.
One of the requirements is resistance to wind stresses.
In this way, the BX260 for example withstands a wind pressure of 7 kg/m²

The BX260 is a compact and relatively flat cassette awning provided with strong arms. The fabric is completely protected against dirt and bad weather circumstances by the cassette while it is closed.

At the same time the BX260 is a striking yet discrete addition to any façade: discrete due to the minimal depth of the box and striking due to its contemporary design.
Features  
The box and the extension pole of the awning are finished with aesthetic aluminium painted covers in the colour of the awning. A flounce can be provided to the extension pole as an option. The cassette is built up out of profiles fitting perfectly into each other. All parts are hooked into the rear profile and in this way form a compact and strong basis for the awning.
     
As an option, a fabric roller support profile can be provided. This offers protection and support to the fabric. The fabric roller support profile is additionally also covered with a synthetic profile for good onveyance of the fabric. The synthetic entry piece of the extension pole ensures a perfect positioning of this extension pole in fitting against the box. A continuous variable adjustment of the gradient of the awning is possible due to the solid angle adjustment that is hooked into the rear plate. Gradients between 10° and 40° are possible. However the gradient angle is adjusted, the extension pole always continues to connect excellently.
     

▪ PR SERIES FOLDING ARM
  - PR 230 FOLDING ARM
  The folding arm awning type PR 230 has an aluminium extruded casing with strong cast aluminium end covers which encloses the fabric completely providing maximum protection against dirt and poor weather.
 
 
General Specifications  
The arms | Extruded powder coated aluminium arms.
The hinges | High pressure cast aluminium alloy. Hinge on durable slide bearings of toughened bronze
                         with a PTFE sliding layer. The most heavily loaded parts are thermally treated.
Springs and steel cables | Zinc plated high quality spring steel.
                                                   Grease impregnated Zinc plated steel cables ensure an even division of power.
The shoulder | Extruded powder coated aluminium components.
Angle range from 10° to 45° Width sizes | Maximum 6 meters in one part with two arms.
Projection sizes | 5 standard sizes of 1.5m, 2m, 2.5m, 3m & 3.5m
Operation | Manual operation using a crank and gearbox is also available.
   
Features  
A hard PVC profile in the top board prevents marks on the fabric the fabric roller support profile offers protections and support to the fabric. The inside of this profile is clad with a synthetic anti-wear profile for better running and longer lifespan of the fabric
   

  - PR 220 FOLDING ARM
  The folding arm awning type PR 220 has an aluminium extruded hood with strong cast aluminium end covers providing protection for the fabric. When extended the strong spring assembly in the arms ensures maximum fabric tension is maintained.
 
 
General Specifications    
The arms | Extruded powder coated aluminium arms.
The hinges | High pressure cast aluminium alloy. Hinge on durable slide bearings of toughened bronze
                         with a PTFE sliding layer. The most heavily loaded parts are thermally treated.
Springs and steel cables | Zinc plated high quality spring steel.
                                                  Grease impregnated Zinc plated steel cables ensure an even division of power.
The shoulder | Extruded powder coated aluminium components. Angle range from 10° to 45°
Width sizes | Maximum 6 meters in one part with two arms.
Projection sizes | 5 standard sizes of 1.5m, 2m, 2.5m, 3m & 3.5m
Operation | Manual operation using a crank and gearbox is also available.
     
Features    
The Side covers are mode of aluminum and the front rail is
small and compact
Elegant profile The fabric is protected on the top
by an elegant cover
     

  - PR 210 FOLDING ARM
  The folding arm awning type PR 210 is suitable for fitting under a balcony or projection, where it is not necessary to give the fabric further protection. The covers are mode of aluminium and the extension pole is small and compact.
 
 
General Specifications    
The arms | Extruded powder coated aluminium arms.
The hinges | High pressure cast aluminium alloy. Hinge on durable slide bearings of toughened bronze
                         with a PTFE sliding layer. The most heavily loaded parts are thermally treated.
Springs and steel cables | Zinc plated high quality spring steel.
                                                  Grease impregnated Zinc plated steel cables ensure an even division of power.
The shoulder | Extruded powder coated aluminium components. Angle range from 10° to 45°
Width sizes | Maximum 6 meters in one part with two arms.
Projection sizes | 5 standard sizes of 1.5m, 2m, 2.5m, 3m & 3.5m
Operation | Manual operation using a crank and gearbox is also available.
     
Features    
The Side covers are mode of aluminum and the front rail is small and compact Elegant profile The solid angle adjustment shoulders ensures the gradient of the awning is maintained over the extension.
     

▪ BUNDEENA
 Open Folding Arm Awning
The Bundeena is an attractive, affordable and reliable folding arm awning, giving protection from the intense heat, glare and harmful UV rays of the sun, creating a cool and shady outdoor entertainment area in minutes.

The awning comes standard with manual crank handle operation, or alternatively can be motorised.

The Bundeena is an open style folding arm awning which will stylishly extend your living area by acting as a retractable fabric roof. The reliability and durability of the Bundeena Folding Arm Awning ensures you will make the most of your outdoor space for many years to come.

Acrylic block out fabric in a range of colours is generally used in the Bundeena Folding Arm Awning to provide maximum protection for the sun’s rays.

A durable powder coated aluminium hood is available and provides additional fabric protection when the awning is closed.
Specifications
Application : Deck, patios & uncovered outdoor areas
Sizes : Min. Width : 2,200mm
Max. Width : 6,000mm
Max. Projection : 3,000mm
Optional Hood : 200mm wide x 75mm high
Arms : Heavy duty aluminium arm sections with spring tensioned cables (PVC covered) 1.5, 2.0, 2.5 & 3.0 metre long arms are available
Operation Selection : Manual crank operated gear box is standard.
RTS motorisation is available as an optional extra
Pitch Adjustment : Installer adjustment pitch range 0 deg to 45 deg. Adjustment is with a spanner
Framework : Galvanised steel fabric top tube 40mm x 40mm powder coat painted square bar
Front Bar : Heavy duty aluminium front bar which can be tted with a straight or scalloped valance
Fasteners : Stainless steel
Frame Finish : Front bar, folding arms, hood & brackets are all powder coated in a choice of 3 colours - Pearl White, Classic Cream or Grey
Fabric Choice : Para acrylic fabrics available in 11 standard colours.
Sunbrella acrylic fabrics in over 50 colours and patterns
   

▪ AVALON
 Full Cassette Folding Arm Awning
The Avalon is a stylish full cassette retractable folding arm awning. The Avalon is perfect for those who enjoy outdoor living providing effective temporary external shading for those times of the day when the heat of the sun is at its peak giving protection from the intense heat, glare and harmful UV rays of the sun, creating a cool and shady outdoor entertainment area in minutes.

The awning comes standard with manual crank handle operation, or alternatively can be motorised.

The Avalon is a full cassette style folding arm awning which will beautifully extend your living area by acting as a retractable fabric roof. The reliability and durability of the Avalon ensures you will make the most of your outdoor space for many years to come.

Acrylic block out fabric in a range of colours is generally used for the Avalon Full Cassette Folding Arm Awning to provide maximum protection from the sun’s rays.

A stylish full cassette powder coated aluminium housing is standard providing fabric protection when the awning is closed. There are no external plastic components exposed to the sunlight
Specifications
Application : Deck, patios & uncovered outdoor areas
Sizes : Min. Width : 2,200mm
Max. Width : 6,000mm
Max. Projection : 3,000mm
Max. Area : 18m²
Optional Hood : 200mm wide x 75mm high
Arms : Full cassette housing with integral hood. Housing 250mm maximum width x 250mm maximum depth.
Brackets available for face mount on walls only
Operation Selection : Manual crank operated gear box is standard.
RTS motorisation is available as an optional extra
Pitch Adjustment : Installer adjustment pitch range 0 deg to 45 deg. Adjustment is with a spanner
Framework : Galvanised steel fabric top tube.
Aluminium full cassette
Front Bar : Heavy duty aluminium full cassette front extrusion
Fasteners : Stainless steel
Frame Finish : Cassette, including Front bar & rear housing, folding arms, & brackets are all powder coated in a choice of 3 colours - Pearl White, Classic Cream or Grey
Fabric Choice : Para acrylic fabrics available in 11 standard colours.
Sunbrella acrylic fabrics in over 50 colours and patterns
   

▪ WINDSOR
 Traditional Automatic Awning
The Windsor is a traditional style Automatic Awning where the guide arms are attached to the ends of the front bar.

The Windsor is a stylish ground oor and balcony awning system suitable for sliding or partially opening hinged window applications where access round the house maybe limited. The arms of the awning extend a minimal & constant distance away from the wall, allowing access to any side paths around the the building.

Acrylic block out fabric is generally used in this style of awning to provide maximum protection from the sun’s rays. Alternatively, a sunscreen mesh fabric may be used to give day time privacy with ltered shade protection, while still allowing natural light and fresh air to lter & circulate.

The Windsor Awning comes standard with a stylish, powder coated painted steel hood which provides additional protection for the fabric when the awning is retracted.

The spring loaded arms provide greater stability in light wind conditions when the awning is lowered and help increase fabric life when manually adjusted. The spring loaded bottom bar arms can be locked on the guide rods in any position.
Specifications
Application : Windows, Verandas, Pergolas, Balconies, Semi-Open Spaces
Sizes : Min. Width : 900mm
  Max. Width : 4,000mm
  Max. Projection : 2,400mm
Max. Area : 9,6m²(depending on fabric choice)
Headbox : Powder coat painted steel open style hood 175mm wide x 200mm deep
Guides : Fixed position arm & wall guides width xings.
Electro plated steel guides are standard.
Stainless steel guides are an optional extra
Bottom Bar : 5 Sided heavy duty aluminium extrusion
Operation Selection : Spring loaded manual operation, using a boat hook
Framework : Electro plated steel arms.
Galvanised steel fabric tube
Fasteners : Electro plated steel
Frame Finish : Powder coated in a choice of 3 colours Pearl White, Classic Cream, Night Sky Black
Fabric Choice : Para acrylic fabrics available in 11 standard colours.
Sunbrella acrylic fabrics in over 50 colours and patterns.
Polyester/PVC Sunsreen fabrics - Nova Solscape E1 & Nova Highshade DN.
Polyester/PVC Sunsrceen fabrics, architectural style - Nova Solscape E2
   

▪ KIRRIBILLI
 Multistop Channel Guide Awning
The Kirribilli Multistop Channel Guide Awning is perfect for shading the sides of pergolas, verandahs, outdoor living areas, cafes and restaurants for privacy, sun, wind and rain protection.

The Kirribilli Multistop Channel Guide Awnings can be use with our range of mesh and acrylic blockout fabrics.

The Kirribilli Multistop Channel Guide Awning is spring tensioned. The bottom bar can be xed at any point within the side channels by turning and moving the spring loaded bottom bar which locks into position wherever it is released.

The powder coated side channels help to reduce problems of light, wind and rain coming through gaps on the sides of the awnings.

The Kirribilli Multistop Channel Guide Awning comes standard without a hood. A powder coated steel hood which provides protection for the fabric when the awning is closed is available as an optional extra.
Specifications
Application : Windows, Verandas & Balconies
Sizes : Min. Width : 900mm
  Max. Width : 4,000mm
  Max. Projection : 2,700mm
Max. Area : 7,3m²(depending on fabric choice)
Headbox : Optional Powder coat painted steel open style hood 175mm wide x 200mm deep
Guides : Powder coat painted aluminium channels
Bottom Bar : 5 Sided heavy duty aluminium extrusion
Operation Selection : Spring loaded manual operation
Framework : Galvanised steel fabric tube
Fasteners : Electro plated steel
Frame Finish : Powder coated in a choice of 3 colours Pearl White, Classic Cream, Night Sky Black
Fabric Choice : Para acrylic fabrics available in 11 standard colours.
Sunbrella acrylic fabrics in over 50 colours and patterns.
Polyester/PVC Sunsreen fabrics - Nova Solscape E1 & Nova Highshade DN.
Polyester/PVC Sunsrceen fabrics, architectural style - Nova Solscape E2
   

▪ BRUNSWICK
 Pivot Arm Awning
The Brunswick Pivot Arm Awning is a stylish awning system suitable for many applications. One real advantage of this style of awning is that the controls can be operated from inside the house.

Acrylic block out fabrics are generally used in this style of awning to provide maximum protection for the sun’s rays. Alternatively, a sunscreen mesh fabric may be used to give day time privacy with ltered shade protection, while still allowing natural light and fresh air to lter & circulate.

The Brunswick Pivot Arm Awning comes standard with a stylish, powder coated steel hood which provides additional protection for the fabric when the awning is closed.

The spring loaded arms provide greater stability in light wind conditions when the awning is lowered. The arms can be xed in any position with the use of either a winch or a tape and tape cord lock.

The Brunswick Pivot Arm Awning is also suitable for motorisation.
Specifications
Application : Windows, Verandas & Balconies
Sizes : Min. Width : 500mm
  Max. Width : 4,000mm
  Max. Projection : 2,700mm
Max. Area : 18m²(depending on fabric choice)
Headbox : Powder coat painted steel open style hood 175mm wide x 200mm deep
Arms : Anodised aluminium
Bottom Bar : 5 Sided heavy duty aluminium extrusion
Operation Selection : External manually operated tape cord lock is standard
Internal manually operated tape cord lock is available as an optional extra.
Internal or external manually operated tape winch is also available as an opt. extra.
Framework : Galvanised steel fabric tube
Anodised aluminium pivot arms
Fasteners : Electro plated steel
Frame Finish : Powder coat painted hood & front bar in a choice of 3 colours Pearl White,
Classic Cream, Night Sky Black
Fabric Choice : Para acrylic fabrics available in 11 standard colours.
Sunbrella acrylic fabrics in over 50 colours and patterns
Polyester/PVC Sunscreen fabrics - Nova Solscape E1 & Nova Highshade DN
Polyester/PVC Sunscreen fabrics, architectural style - Nova Solscape E2
   

▪ RICHMOND
 Maxishade Auto Guide Awning
The Richmond Automatic Awning is a modern style of automatic awning where the fabric skin can be made to be wider than the window and the guiding arms of the awning to provide better shading. This awning is often suitable for mounting where wall xing points are not solid enough, such as cladded walls.

Acrylic blockout fabric is generally used in this style of awning to provide maxi-mum protection from the sun’s rays. Alternatively, a sunscreen mesh fabric may be used to give day time privacy with ltered shade protection, while still allowing natural light and fresh air to lter & circulate.

The Richmond Automatic Awning comes standard with a stylish, powder coated painted steel hood which provides additional protection for the fabric when the awning is retracted.

The spring loaded arms provide greater stability in light wind conditions when the awning is lowered. The spring loaded bottom bar arms can be locked on the guide rods in any position
Specifications
Application : Windows, Verandas & Balconies
Sizes : Min. Width : 900mm
  Max. Width : 4,000mm
  Max. Projection : 2,400mm
Max. Area : 9.6m²(depending on fabric choice)
Headbox : Powder coat painted steel open style hood 175mm wide x 200mm deep
Guides : Adjustable position arm & wall guides width xings.
Electro plated steel guides are standard.
Stainless steel guides are an optional extra.
Bottom Bar : 5 Sided heavy duty aluminium extrusion
Operation Selection : Spring loaded manual operation, using a boat hook
Framework : Electro plated steel arms
Galvanised steel fabric tube
Fasteners : Electro plated steel
Frame Finish : Powder coated in a choice of 3 colours Pearl White, Classic Cream, Night Sky black
Fabric Choice : Para acrylic fabrics available in 11 standard colours.
Sunbrella acrylic fabrics in over 50 colours and patterns
Polyester/PVC Sunsreen fabrics - Nova Solscape E1 & Nova Highshade DN
Polyester/PVC Sunsrceen fabrics, architectural style - Nova Solscape E2